Routine maintenance and maintenance of granulator
2018-06-26
The daily maintenance work of granulator:
In this case,
1. Granulator in the course of daily use, to regularly check the rotation of the disc, according to the specific provisions of the granulator to control the speed of the disc in a reasonable range, so as to avoid the impact of too fast disc speed Product granularity.
In this case,
2. Granulator in the use of the process, in particular, need to pay attention to check the transmission of the granulator components, namely transmission gears, transmission gears in the rotation is assisted by the completion of the lubricating oil, so the big gear running The process must be regularly checked its lubrication, the appropriate gear for the addition of lubricants and grease to ensure that the gears of good lubrication, so that the operation of the granulator more stable and reliable.
In this case,
3. As the pelletizer is a wet granulation model, the upper part of the disc is usually equipped with a spray device to increase the viscosity of the material used to wet the material, so in order to ensure the material has good adhesion, should always check the spray Device to protect the spray device in the waterway.
In this case,
The overall structure of the granulator is supported by the rack. When the machine is running, pay attention to check whether the anchor bolts connected with the foundation ground are solid and loose. If the bolts are loose, they must be tightened in time. Solid, or granulator in operation, will have a strong vibration and noise, and even lead to accidents.
In this case,
Granulator maintenance content: ① the main mixing seal. ② Reducer maintenance: Monthly check once the belt reducer wear and tension, serious wear and tear timely replacement, the degree of tightness can be adjusted with the adjustment screw. Reducer plus 90 # oil every six months for a time. ③ cutting components maintenance. ④ Regularly check the belt tension and wear, and replace the wear serious belt. ⑤ often check the movement of the parts are loose, if loose, should be tightened immediately, if necessary, to adjust or replace, to ensure the connection firmness. ⑥ every six months to add bearing butter, the amount of bearing space does not exceed 2 / ⑦ keep the equipment surface clean, no sundries around, do not spill water cleaning equipment, control panel. ⑧ regularly by the maintenance staff to conduct a detailed inspection of the equipment, maintenance, failure to repair or replacement in a timely manner to ensure the use of equipment performance intact.
In this case,
1. Granulator in the course of daily use, to regularly check the rotation of the disc, according to the specific provisions of the granulator to control the speed of the disc in a reasonable range, so as to avoid the impact of too fast disc speed Product granularity.
In this case,
2. Granulator in the use of the process, in particular, need to pay attention to check the transmission of the granulator components, namely transmission gears, transmission gears in the rotation is assisted by the completion of the lubricating oil, so the big gear running The process must be regularly checked its lubrication, the appropriate gear for the addition of lubricants and grease to ensure that the gears of good lubrication, so that the operation of the granulator more stable and reliable.
In this case,
3. As the pelletizer is a wet granulation model, the upper part of the disc is usually equipped with a spray device to increase the viscosity of the material used to wet the material, so in order to ensure the material has good adhesion, should always check the spray Device to protect the spray device in the waterway.
In this case,
The overall structure of the granulator is supported by the rack. When the machine is running, pay attention to check whether the anchor bolts connected with the foundation ground are solid and loose. If the bolts are loose, they must be tightened in time. Solid, or granulator in operation, will have a strong vibration and noise, and even lead to accidents.
In this case,
Granulator maintenance content: ① the main mixing seal. ② Reducer maintenance: Monthly check once the belt reducer wear and tension, serious wear and tear timely replacement, the degree of tightness can be adjusted with the adjustment screw. Reducer plus 90 # oil every six months for a time. ③ cutting components maintenance. ④ Regularly check the belt tension and wear, and replace the wear serious belt. ⑤ often check the movement of the parts are loose, if loose, should be tightened immediately, if necessary, to adjust or replace, to ensure the connection firmness. ⑥ every six months to add bearing butter, the amount of bearing space does not exceed 2 / ⑦ keep the equipment surface clean, no sundries around, do not spill water cleaning equipment, control panel. ⑧ regularly by the maintenance staff to conduct a detailed inspection of the equipment, maintenance, failure to repair or replacement in a timely manner to ensure the use of equipment performance intact.
