How to install the piping of the dehumidifying dryer?
2018-08-30
Pipeline installation of dehumidifying dryer
1.1 Cooling water is best to use softened water or chilled water, the temperature range is 15 ~ 25 ° C, can extend the life of the machine, dehumidification effect is also better.
1.2 Connect the cooling water inlet and outlet of this unit to your cooling water system. For good cooling effect, the pressure at the inlet of the cooling water of the machine should be between 2 and 3 kg/m2. If the water pressure is not enough, adjust the water pressure controller in the front and lower plates of the unit clockwise to 1 kg/m2. The water fittings are 3/4” (19mm).
1.1 Cooling water is best to use softened water or chilled water, the temperature range is 15 ~ 25 ° C, can extend the life of the machine, dehumidification effect is also better.
1.2 Connect the cooling water inlet and outlet of this unit to your cooling water system. For good cooling effect, the pressure at the inlet of the cooling water of the machine should be between 2 and 3 kg/m2. If the water pressure is not enough, adjust the water pressure controller in the front and lower plates of the unit clockwise to 1 kg/m2. The water fittings are 3/4” (19mm).
