The influence of the geometric parameters of the ring die on the quality of the pellet feed is mainly manifested in the effective length of the die hole of the ring die, the diameter, the roughness of the membrane hole, the spacing of the die holes, the shape of the die holes, etc.

Due to improper steam usage and pressure during raw material formula processing and conditioning, abnormal particles will be suppressed.

Don't be careless when using the new mold. Before the new mold reaches the best production capacity, it is necessary to run in properly.

Air seal and air seal cleaning are completed by a common set of pipelines. During commissioning, first turn the command switch to the stop position, observe whether there is overflow or leakage of gas and water in the air cavity, and if necessary, check the one-way valve.

Drying wood and bricks and tiles requires a lower drying speed and adopts tunnel drying.

The steel hollow drum rotates slowly at a speed of 4-10 rpm.